TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download

Page 787 of 1268

TM 9-2320-365-20-3 11-7. FRONT BRAKE AIR CHAMBER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Pipe (Item 55, Appendix C) Trestle, Motor Vehicle Maintenance (Item 45, Appendix C) Goggles, Industrial (Item 15, Appendix C) Respirator, Air Filter (Item 29, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Antiseize Compound (Item 63, Appendix D) Ties, Cable, Plastic (Item 76, Appendix D) Nut, Plain, Round (Item 115.1, Appendix G) Personnel Required (2) a. Removal. WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. CAUTION Use caution not to pinch left side air hoses when positioning trestles. Failure to comply may result in damage to equipment. NOTE Left and right front brake air chambers are removed the same way. Left side shown. (1) Position front of vehicle on trestle so wheel is off ground. (2) Remove left front wheel from vehicle (TM 9-2320-365- 10). Change 1 11-33