TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 785 of 1268
TM 9-2320-365-20-3 NOTE Save rubber cap for use after uncaging operation to seal spring brake chamber. (3) Remove rubber cap (5) from spring brake chamber (6). (4) Insert T-end of caging bolt (3) in back of spring brake chamber (6). (5) Lock caging bolt (3) in place by turning caging bolt to the right 1/4 turn. (6) Position washer (2) and nut (1) on caging bolt (3). (7) Tighten nut (1) until brakes are fully released, wheel turns freely. b. Uncaging. (1) Remove nut (1) and washer (2) from caging bolt (3). (2) Remove caging bolt (3) by turning to the left 1/4 turn. (3) Remove caging bolt (3) from spring brake chamber (4). Change 1 11-31