TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 784 of 1268
TM 9-2320-365-20-3 11-6. REAR SPRING BRAKE CAGING This task covers: a. Caging b. Uncaging INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Socket, Socket Wrench (Item 38, Appendix C) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Caging. NOTE To cage brakes, apply caging procedure to both top and bottom spring brake chambers. (1) Remove nut (1) and washer (2) from caging bolt (3). (2) Remove caging bolt (3) from caging bolt holder (4). 11-30