TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 773 of 1268
TM 9-2320-365-20-3 (5) Remove seal (5) from anchor plunger (6). (6) Perform step (5) on second anchor plunger. c. Cleaning/Inspection. WARNING Dry Cleaning Solvent is toxic and flammable. Wear protective goggles, face shield, and gloves; use only in a well-ventilated area. Avoid contact with skin, eyes, and clothes, and do not breathe vapors. Keep away from heat or flame. Never smoke when using solvent. The flashpoint for Type I Dry Cleaning Solvent is 100°F (38°C) and for Type II Dry Cleaning Solvent is 140°F (60°C). Failure to comply may result in serious injury or death to personnel. (1) Clean all metal parts thoroughly with dry cleaning solvent. NOTE Replace plungers, sleeves, screws, springs, and pawls as a unit. (2) Inspect two adjusting plungers (1), adjusting sleeves (2), and adjusting screws (3) for damage. (3) Inspect two screws (4), springs (5), and adjusting pawls (6) for damage. 11-19