TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 771 of 1268
TM 9-2320-365-20-3 11-4. FRONT BRAKE PLUNGER ASSEMBLY REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Cleaning/Inspection d. Assembly e. Installation f. Follow-On Maintenance INITIAL SETUP Equipment Conditions Front brake shoes removed (para 11-2). Front brake air chamber removed (para 11-7). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Trestle, Motor Vehicle Maintenance (Item 45, Appendix C) Gloves, Rubber (Item 13, Appendix C) Brake Plunger Seal Driver (Item E-3, Appendix E) Materials/Parts Solvent, Dry Cleaning (Item 71, Appendix D) Grease, Automotive and Artillery (GAA) (Item 23, Appendix D) Rag, Wiping (Item 51, Appendix D) Lockwasher (4) (Item 108, Appendix G) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. (1) Remove wedge assembly (1) from plunger housing (2). 11-17