TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 748 of 1268
TM 9-2320-365-20-3 10-22 Change 2 10-5. SPINDLE REPLACEMENT (CONT) (4) Remove fitting (3) from fitting (10). (5) Remove fittings (4 and 10) from spindle (11). (6) Remove 45-degree fitting(5) from spindle (11). (7) Remove spindle (11) from hub assembly (9) and axle shaft (12). WARNING CAUTION NOTE • Note position and orientation of fitting(s) prior to removal. • Steps (4) and (5) apply to front spindles only. Do not hit spindle with a steel hammer to remove. Damage to spindle can occur and broken parts can get as projectiles. Failure to comply may result in injury to personnel or damage to equipment. Do not pry spindle with a sharp tool. Damage to the mounting surfaces can occur. Failure to comply may result in damage to equipment. NOTE Step (6) applies to intermediate and rear spindles only.