TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 746 of 1268
TM 9-2320-365-20-3 10-20 Change 2 10-5. SPINDLE REPLACEMENT This task covers: a. Removal b. Cleaning/Inspection c. Installation. d. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10) Cab raised (TM 9-2320-365-10) Air tanks drained (TM 9-2320-365-10) Wheel and tire removed (TM 9-2320-365-10) Hub assembly drained (for front spindles only) (Appendix H) Differential spider assembly removed (para 10- 3) Wheel bearing/CTIS seal removed (para 10-2) Front brake shoes removed (front spindles only) (para 11-2) Rear brake shoes removed (rear spindles only) (para 11-3) Front brake air chamber removed (front spindles only) (para 11-7) Rear brake air chambers removed (rear spindles only) (para 11-8) Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Jack, Hydraulic, Hand (Item 21, Appendix C) Tool Kit, Genl Mech (Item 44, Appendix C) Trestle, Motor Vehicle Maintenance (Item 45, Appendix C) Wrench Set, Socket (Item 47, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Materials/Parts Antiseize Compound (Item 14, Appendix D) Grease, Automotive and Artillery (GAA) (Item 23, Appendix D) Oil, Lubricating, Gear, 80W-90 (Item 42, Appendix D) Rag, Wiping (Item 51, Appendix D) Sealing Compound (Item 62, Appendix D) Solvent, Dry Cleaning (Item 71, Appendix D) Retainer (Item 214, Appendix G) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. NOTE Front, intermediate, and rear spindles are removed the same way. Front left spindle shown.