TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 738 of 1268
TM 9-2320-365-20-3 10-12 Change 2 10-3. DIFFERENTIAL SPIDER ASSEMBLY REPLACEMENT This task covers: a. Removal b. Cleaning/Inspection c. Installation d. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Goggles, Industrial (Item 15, Appendix C) Gloves, Rubber (Item 13, Appendix C) Pan, Drain (Item 24, Appendix C) Materials/Parts Rag, Wiping (Item 51, Appendix D) Gasket Maker, RTV Silicone (Item 21.1, Appendix D) Solvent, Dry Cleaning (Item 71, Appendix D) Grease, Automotive and Artillery (GAA) (Item 23, Appendix D) Packing, Preformed (4) (Item 185, Appendix G) a. Removal. NOTE (1) Position fill port at 6 o'clock location. (2) Drain oil from wheel end hub assembly (3). (2.1) Remove 12 screws (1) from bevel gear hub cover (2). (2.2) Remove bevel gear hub cover (2) from wheel end hub assembly (3). (3) Remove thrust bearing (4) and thrust washer (5) from bevel gear hub cover (2). Front and rear axle differential spider assemblies are removed the same way. Left front axle differential spider assembly shown.