TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 736 of 1268
TM 9-2320-365-20-3 10-2. WHEEL BEARING/CENTRAL TIRE INFLATION SYSTEM (CTIS) SEAL REPLACEMENT (CONT) (22) Install wheel end shim(s) (17) on wheel bearing nut (14). CAUTION Measurement from surface of shims to face of wheel end hub must be 2.168-2.173 in. (5.51-5.52 cm). Failure to comply may result in damage to equipment. (23) Measure distance from surface of shim(s) (17) to face of wheel end hub (2). (24) Add or remove shim(s) (17) as required to obtain measurement of 2.1678-2.173 in. (5.51-5.52 cm). WARNING Wheel drum weighs approximately 90 lbs (41 kgs). Use the aid of an assistant to install wheel drum. Failure to comply may result in injury to personnel. (25) Install wheel drum (18) on wheel end hub (2). 10-10