TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 724 of 1268
TM –9-2320-365-20-3 9-4 Change 2 9-2. DRIVE SHAFT AND UNIVERSAL JOINT REPLACEMENT/REPAIR (CONT) (8.1) Tighten four screws (8) to 26-35 lb-ft (35-47 N•m). (8.2) Fold tabs on four screws (8). (9) Deleted. (10) Perform steps (7) through (9) on opposite end of drive shaft (3). (11) Apply lubrication to grease fittings on drive shaft (3). f. Follow-On Maintenance. (1) Lubricate drive shaft and universal joints (Appendix H). (2) Test drive vehicle and check for unusual vibrations. End of Task. CAUTION Grease must flow from all four seals. Failure to comply may result in damage to equipment. NOTE Perform the following two steps on bearing cups equipped with tabs.