Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download

Page 719 of 1268

TM 9-2320-365-20-3 Change 2 9-2.1 (4) Lift tabs from two bearing cups (6) (4.1) Remove four screws (6) and two bearing cups (7) from drive shaft (4). Discard screws. (5) Remove universal joint (5) from drive shaft (4). (6) Remove two grease fittings (8) from universal joint (5). b. Disassembly. (1) Match mark spline plug (1) to slip yoke (2). (2) Remove dust seal (3) from slip yoke (2). (3) Remove slip yoke (2) from spline plug (1). (4) Remove dust seal (3) from spline plug (1). Discard dust seal. CAUTION Match mark spline plug to slip yoke to prevent assembly out of phase or out of balance. Failure to comply may result in damage to equipment. NOTE Perform the following step on bearing cups with tabs.