TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 713 of 1268
TM 9-2320-365-20-3 8-16. TRANSMISSION OIL COOLER HOSE BRACKET REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Wrench, Torque 0-600 lb-ft (Item 59, Appendix C) Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Materials/Parts Ties, Cable, Plastic (Item 76, Appendix D) Nut, Self-Locking (4) (Item 145, Appendix G) Nut, Self-Locking (4) (Item 134, Appendix G) Gasket (Item 40.1, Appendix G) Personnel Required (2) WARNING • Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. • Ensure exhaust system is cool before performing maintenance. Failure to comply may result in injury to personnel. a. Removal. NOTE • Remove plastic cable ties as required. • Step (1) requires the aid of an assistant. (1) Remove four self-locking nuts (1), bolts (2), and lower front support crossmember (3) from vehicle. Discard self-locking nuts. Change 1 8-67