TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 707 of 1268
TM 9-2320-365-20-3 8-15. TRANSMISSION OIL COOLER HOSES REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Pan, Drain (Item 24, Appendix C) Wrench, Torque 0-200 lb-in. (Item 58, Appendix C) Tool Kit, Genl Mech (Item 44, Appendix C) Crowfoot Attachment, Socket Wrench (Item 12.1, Appendix B) Socket Set, Socket Wrench (Item 34, Appendix C) Wrench, Torque, 0-600 lb-ft (Item 59, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Cap and Plug Set (Item 15, Appendix D) Tie, Cable, Plastic (Item 69, Appendix D) Nut, Self-locking (4) (Item 134, Appendix G) Nut, Self-locking (4) (Item 145, Appendix G) Antiseize Compound (Item 63, Appendix D) Packing, Preformed (2) (Item 158, Appendix G) Packing, Preformed (2) (Item 158.1, Appendix G) Personnel Required (2) WARNING • Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. • Ensure exhaust system is cool before preforming maintenance. Failure to comply may result in injury to personnel. a. Removal. CAUTION Cap or plug hoses when disconnecting to prevent contamination of transmission oil. Failure to comply may result in damage to equipment. NOTE • Tag hoses and connection points prior to disconnecting. • Step (1) requires the aid of an assistant. (1) Remove four self-locking nuts (1), bolts (2), and lower front support crossmember (3) from vehicle. Discard self-locking nuts. Change 1 8-61