TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 69 of 1268
TM 9-2320-365-20-3 4-6. FUEL RATIO CONTROL TUBE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Cab raised (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Materials/Parts Packing, Preformed (2) (Item 183, Appendix G) Packing, Preformed (2) (Item 181, Appendix G) WARNING Diesel fuel is flammable. If fuel is spilled, clean it up immediately. Failure to comply may result in serious injury or death to personnel. a. Removal. (1) Remove screw (1), washer (2), and loop clamp (3) from pressure regulating orifice (4). (2) Disconnect fuel ratio control tube (5) from adapter (6). (3) Remove preformed packing (7) from adapter (6). Discard preformed packing. (4) Remove adapter (6) from inlet manifold (8). (5) Remove preformed packing (9) from adapter (6). Discard preformed packing. 4-37