TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 689 of 1268
TM 9-2320-365-20-3 8-11. TRANSMISSION OIL COOLER TUBES REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Cab raised (TM 9-2320-365-10). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Pan, Drain (Item 24, Appendix C) Crowfoot Attachment, Socket Wrench (Item 12.1, Appendix B) Tools and Special Tools (Cont) Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Materials/Parts Packing, Preformed (2) (Item 165, Appendix G) Packing, Preformed (Item 158.2, Appendix G) WARNING • Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. • Ensure exhaust system is cool before performing maintenance. Failure to comply may result in injury to personnel. a. Removal. (1) Position drain pan under transmission oil cooler tube (1). (2) Disconnect transmission oil cooler tube (1) from 90- degree fitting (2). NOTE Transmission oil cooler tube must exit from rear of vehicle. (3) Remove transmission oil cooler tube (1) from transmission oil cooler (3). Change 1 8-43