TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download

Page 684 of 1268

TM 9-2320-365-20-3 8-10. TRANSMISSION OIL COOLER REPLACEMENT (CONT) NOTE Perform steps (18) through (20) on vehicles equipped with transmission oil cooler hoses. (18) Disconnect transmission oil cooler hoses (13 and 14) from two fittings (15). (19) Remove two fittings (15) from transmission oil cooler (5). (20) Remove two preformed packings (16 and 17) from fittings (15). Discard preformed packings. NOTE • Vehicles may be equipped with either a corrosive enhanced clamp or a non-corrosive enhanced clamp. Corrosive enhanced clamps have a self-locking nut and interior lining. When removing a non-corrosive enhanced clamp, replace it with a corrosive enhanced clamp. • Steps (21) and (22) require the aid of an assistant. • Perform step (21) on vehicles not equipped with corrosive enhanced clamp. (21) Remove screw (18), clamp (19), and transmission oil cooler (5) from bracket (20). Discard clamp and screw. 8-40 Change 1