TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 682 of 1268
TM 9-2320-365-20-3 8-10. TRANSMISSION OIL COOLER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Container (60 qt (57 L) capacity) Pan, Drain (Item 24, Appendix C) Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-75 lb-in. (Item 86, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix B) Crowfoot Attachment, Socket Wrench (Item 12.1, Appendix B) Materials/Parts Antifreeze, Ethylene Glycol, Permanent (Item 13, Appendix D) Packing, Preformed (4) (Item 158, Appendix G) Packing, Preformed (2) (Item 158.1, Appendix G) Nut, Self-Locking (Item 122.1, Appendix G) Personnel Required (2) WARNING • Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. • Ensure exhaust system is cool before performing maintenance. Failure to comply may result in injury to personnel. a. Removal. (1) Position container under radiator (1). (2) Remove radiator cap (2) from radiator overflow tank (3). (3) Open radiator draincock (4) and drain coolant. (4) Close radiator draincock (4). 8-38 Change 1