TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 678 of 1268
TM 9-2320-365-20-3 8-9. TRANSMISSION OIL FILTER REPLACEMENT (CONT) CAUTION Use care when removing bearing cups from universal joint. Failure to comply may result in damage to equipment. (9) Remove four screws (7) and two bearing cups (8) from drive yoke (9). Discard screws. (10) Slide drive shaft (10) from side to side and separate universal joint (10.1) from drive yoke (9). NOTE Both transmission oil filters are removed the same way. Right side transmission oil filter shown. (11) Remove six screws (11) from transmission oil filter cover (12). NOTE Perform step (12) on transmissions SN lower than 6510069120. (12) Remove transmission oil filter cover (12) and trans- mission oil filter (13) from transmission control valve module (1). NOTE Perform step (13) on transmissions SN 6510069120 and higher. (13) Remove transmission oil filter cover (12), gasket (14), and transmission oil filter (13) from transmission control valve module (1). Discard gasket. (14) Remove transmission oil filter (13) from transmission oil filter cover (12). 8-34 Change 1