TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 661 of 1268
TM 9-2320-365-20-3 8-6. WTEC II VEHICLE INTERFACE MODULE (VIM) REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-48). Kick panel removed (para 16-3). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Materials/Parts Seal Ring, Metal (Item 251, Appendix G) a. Removal. (1) Remove two screws (1) and washers (2) from WTEC II VIM (3). (2) Remove screw (4), washer (5), and two washers (6) from WTEC II VIM (3). (3) Loosen screw (7) in connector J116 (8). (4) Disconnect connector J116 (8) from WTEC II VIM (3). (5) Loosen screw (9) in connector PX33 (10). (6) Disconnect connector PX33 (10) from WTEC II VIM (3). (7) Remove WTEC II VIM (3) from vehicle. 8-19