TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 660 of 1268
TM 9-2320-365-20-3 8-5. WTEC III CODE READING AND CODE CLEARING PROCEDURES (CONT) d. Exiting the Diagnostic Display Mode. (1) Exit the diagnostic display mode by any of the following methods: (a) Press ↑ (1) and ↓ (2) (up arrow and down arrow) buttons on WTEC III TPSS (3) at the same time. (b) Press any range button (4), D, N, or R on WTEC III TPSS (3) (shift will be commanded if not inhibited by an active diagnostic code). (c) Wait until the calibrated time (approximately 10 minutes) has passed and system automatically returns to normal operating mode. (d) Position master power switch to off (TM 9-2320-365- 10). e. Follow-On Maintenance. Perform Transmission System Troubleshooting (para 2-17). End of Task. 8-18