TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 640 of 1268
TM 9-2320-365-20-3 Section II. MAINTENANCE PROCEDURES 8-2. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) AND BRACKET REPLACEMENT AND CALIBRATION This task covers: a. Removal b. Installation c. Calibration INITIAL SETUP Equipment Conditions Instrument panel assembly removed for access (para 7- 15). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-75 lb-in. (Item 86, Appendix B) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Solvent, Dry Cleaning SD (P-D-680) (Item 71, Appendix D) Paper, Abrasive (Item 48, Appendix D) Fastener Tape (Item 10, Appendix G) Fastener Tape (Item 11, Appendix G) a. Removal. NOTE Tag connectors and connection points prior to disconnecting. (1) Disconnect connector J115 (1) from WTEC II TEPSS (2). (2) Disconnect connector J114 (3) from WTEC II TEPSS (2). (3) Remove screw (4), washer (5), and ground terminal lug (6) from WTEC II TEPSS (2). 8-2