TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 635 of 1268
TM 9-2320-365-20-3 7-88. LOW PRESSURE TRANSMITTER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Cab raised (TM 9-2320-365-10). Air tanks drained (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Drill, Portable, Electric (Item 7, Appendix C) Drill Set, Twist (Item 6, Appendix C) Materials/Parts Adhesive (Item 9, Appendix D) Antiseize Compound (Item 14, Appendix D) Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Lockwasher (2) (Item 90, Appendix G) a. Removal. NOTE • Perform step (1) on vehicle serial number 7448 and higher and vehicle serial numbers 0001 through 7447 that have previously had front lights cable assembly replaced. • Tag wires and connection points prior to removal. (1) Remove adhesive and boot (1) from low pressure transmitter (2). (2) Remove adhesive, two nuts (3), lockwashers (4), and terminal lugs TL201 (5) and TL202 (6) from low pressure transmitter (2). Discard lockwashers. (3) Remove low pressure transmitter (2) from reducer bushing (7). Change 1 7-381