TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download

Page 630 of 1268

TM 9-2320-365-20-3 7-87. WTEC III CAB TRANSMISSION HARNESS REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Instrument panel assembly removed for access (para 7- 15). Kick panel removed (para 16-3) Personnel heater removed (para 18-9). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Ties, Cable, Plastic (Item 76, Appendix D) Lockwasher (4) (Item 67, Appendix G) Gasket (Item 24, Appendix G) Personnel Required (2) a. Removal. NOTE • Remove plastic cable ties as required. • Note routing of WTEC III cab transmission harness prior to removal. • Tag connectors and connection points prior to disconnecting. (1) Disconnect connector P119 (1) from connector J119 (2). NOTE Step (2) requires the aid of an assistant. (2) Remove four nuts (3), lockwashers (4), screws (5), gasket (6), and connector J119 (2) from cab (7). Discard lockwashers and gasket. 7-376