Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download

Page 63 of 1268

TM 9-2320-365-20-3 4-5. CHARGE AIR COOLER TO AIR INLET ELBOW TUBES AND HOSES REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Cab raised (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Screwdriver Attachment, Socket Wrench (Item 46, Appendix B) Tools and Special Tools (Cont) Socket Set, Socket Wrench (Item 35, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Materials/Parts Nut, Self-Locking (2) (Item 138, Appendix G) a. Removal. (1) Remove two self-locking nuts (1), screws (2), and upper charge air tube bracket (3) from lower charge air tube bracket (4). Discard self-locking nuts. NOTE Inner and outer charge air cooler to air inlet elbow tubes are removed the same way. Outer charge air cooler to air inlet elbow tube shown. (2) Loosen clamp (5) on hose (6). (3) Disconnect hose (6) from air inlet elbow (7). 4-31