TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 619 of 1268
TM 9-2320-365-20-3 7-85. WINCH CONTROL VALVE CABLE ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-48). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Goggles, Industrial (Item 15, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Materials/Parts Ties, Cable, Plastic (Item 76, Appendix D) Nut, Self-Locking (3) (Item 116, Appendix G) Nut, Self-Locking (Item 134, Appendix G) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. NOTE Remove plastic cable ties as required. (1) Disconnect connector J215 (1) from connector P215 (2). Change 1 7-365