TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 60 of 1268
TM 9-2320-365-20-3 4-4. TURBOCHARGER TO CHARGE AIR COOLER TUBE AND HOSES REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Cab raised (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Socket Set, Socket Wrench (Item 35, Appendix C) Materials/Parts Cap and Plug Set (Item 15, Appendix D) a. Removal. NOTE Note position of clamps prior to removal. (1) Loosen two hose clamps (1) and hose clamps (2) on turbocharger to charge air cooler tube (3). (2) Remove turbocharger to charge air cooler tube (3) from charge air cooler (4) and turbocharger (5). CAUTION Cap or plug turbocharger outlet and charge air cooler inlet to prevent contamination of engine intake air system. Failure to comply may result in damage to equipment. (3) Cap or plug turbocharger outlet (6) and charge air cooler inlet (4). 4-28