TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 579 of 1268
TM 9-2320-365-20-3 7-78. REAR INTERVEHICULAR 12 VDC (7 PIN) CABLE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-48). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Goggles, Industrial (Item 15, Appendix C) Materials/Parts Ties, Cable, Plastic (Item 76, Appendix D) Nut, Self-Locking (2) (Item 116, Appendix G) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. NOTE Remove plastic cable ties as required. (1) Disconnect connector J52 (1) from connector P52R (2). (2) Remove two self-locking nuts (3), screws (4), washers (5), and rear intervehicular 12 vdc (7 pin) cable (6) from vehicle. Discard self-locking nuts. Change 1 7-327