TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 576 of 1268
TM 9-2320-365-20-3 7-77. POWER TAKE-OFF (PTO) CABLE ASSEMBLY REPLACEMENT (CONT) b. Installation. NOTE Install plastic cable ties as required. (1) Position PTO cable assembly (1) in cab (2). (2) Connect connector J210 (3) to connector P210 (4). (3) Position PTO cable assembly (1) in clamp (5). (4) Position clamp (5) and clamp (6) on frame rail (7) with screw (8) and self-locking nut (9). (5) Tighten self-locking nut (9) to 84-108 lb-in. (10-12 N·m). (6) Position PTO cable assembly (1) in clamp (10). (7) Position clamp (10) on frame rail (7) with screw (11) and self-locking nut (12). (8) Tighten self-locking nut (12) to 84-108 lb-in. (10-12 N·m). 7-324