TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 573 of 1268
TM 9-2320-365-20-3 7-77. POWER TAKE-OFF (PTO) CABLE ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-63). Kick panel removed (para 16-3). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Socket Set, Socket Wrench (Item 35, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Ties, Cable, Plastic (Item 76, Appendix D) Nut, Self-Locking (5) (Item 134, Appendix G) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. NOTE • Tag connectors and connection points prior to disconnecting. • Remove plastic cable ties as required. (1) Disconnect connector P217 (1) from PTO solenoid connector (2). (2) Disconnect connector P216 (3) from PTO pressure switch connector (4). 7-321