TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 568 of 1268
TM 9-2320-365-20-3 7-75. REAR LIGHTS CABLE ASSEMBLY REPLACEMENT (CONT) NOTE Perform steps (54) through (56) on vehicles equipped with SRW. (54) Install rear lights cable assembly (1) in clamp (89). (55) Position screw (90) and clamp (89) on RH taillight carrier (71) with self-locking nut (91). (56) Tighten self-locking nut (91) to 84-108 lb-in. (10-12 N·m). NOTE Perform steps (57) through (59) on vehicles not equipped with SRW. (57) Install rear lights cable assembly (1) in two clamps (89). (58) Position two screws (90) and clamps (89) on RH taillight carrier (71) with two self-locking nuts (91). (59) Tighten two self-locking nuts (91) to 84-108 lb-in. (10-12 N·m). (60) Route rear lights cable assembly (1) through left frame rail (51). (61) Install terminal lug TL17 (107) and backup light (108) on LH taillight carrier (109) with two lockwashers (110) and screws (111). (62) Connect connector P87 (112) to backup light connector (113). 7-316.4 Change 1