TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 551 of 1268
TM 9-2320-365-20-3 7-75. REAR LIGHTS CABLE ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Batteries disconnected (para 7-48). Kick panel removed (para 16-3). Exhaust muffler removed (para 5-2). Bottom radiator fan shroud removed (para 6-4). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Goggles, Industrial (Item 15, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Ties, Cable, Plastic (Item 76, Appendix D) Lockwasher (3) (Item 102.1, Appendix G) Lockwasher (4) (Item 102.2, Appendix G) Lockwasher (5) (Item 71, Appendix G) Nut, Self-Locking (8) (Item 134, Appendix G) Nut, Self-Locking (11) (Item 116, Appendix G) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. NOTE Note routing of rear lights cable assembly and clamps prior to removal. (1) Remove two self-locking nuts (1), clamps (2), and screws (3) from LH taillight carrier (4). Discard self- locking nuts. (2) Remove two clamps (2) from rear lights cable assembly (5). Change 1 7-303