TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 539 of 1268
TM 9-2320-365-20-3 7-74. FRONT LIGHTS CABLE ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-48). PDP cover removed (para 16-2). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Wrench, Torque, 0-75 lb-in. (Item 86, Appendix B) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Ties, Cable, Plastic (Item 76, Appendix D) Adhesive (Item 10, Appendix D) Lockwasher (3) (Item 92, Appendix G) Lockwasher (2) (Item 90, Appendix G) Adhesive (Item 9, Appendix D) a. Removal. NOTE • Remove plastic cable ties as required. • Tag wires and connection points prior to disconnecting. (1) Remove three screws (1) and washers (2) from PDP (3). (2) Remove three screws (4) from PDP (3). (3) Lift PDP (3) outward to gain access. (4) Disconnect connector P27 (5) from connector J27 (6). Change 1 7-291