TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 532 of 1268
TM 9-2320365-20-3 7-286 Change 2 7-72. ENGINE CONTROL CABLE ASSEMBLY REPLACEMENT (CONT) (6) Install clamps (11 and 12) on engine control cable assembly (1). (7) Install clamps (11 and 12) on clamps (13 and 14) with two screws (15) and self-locking nuts (16). (8) Connect connector P41 (17) to coolant temperature gage sensor connector (18). (9) Connect connector clamp (19) on connector P41 (17). (10) Apply electrical tape to TL110 (20). NOTE • Perform step (10) if replacing alternator N1506-1 (12420852) with alternator N1509-1 (12422863). • Install plastic cable ties to TL110 and tie wire away from alternator.