TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 529 of 1268
TM 9-2320-365-20-3 Change 2 7-283 (19) Disconnect connector clamp (33) from connector P36 (34). (20) Disconnect connector P36 (34) from water temp- erature switch connector (35). (21) Remove screw (36), lockwasher (37), washer (38), terminal lugs TL5 (39) and TL8 (40) from alternator (41). Discard lockwasher. (22) Lift dust boot (42) on terminal lugs TL6 (43) and TL2 (44). (23) Remove self-locking nut (45), washer (46), insulation washer (47), and terminal lugs TL6 (43) and TL2 (44) from alternator (41). Discard self-locking nut. (24) Remove terminal lug TL6 (43) from dust boot (42). (25) Lift dust boot (48) on terminal lug TL35 (49). (26) Remove self-locking nut (50), washer (51), and terminal lug TL35 (49) from voltage regulator (52). Discard self-locking nut. (27) Remove dust boot (48) from engine control cable assembly (53). (28) Lift dust boot (54) on terminal lug TL110 (55). (29) Remove self-locking nut (56), washer (57), and terminal lug TL110 (55) from voltage regulator (52). Discard self-locking nut. (30) Remove dust boot (54) from engine control cable assembly (53). NOTE Perform steps (28) through (30) on vehicles that have not had terminal lug TL110 removed.