TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 524 of 1268
TM 9-2320-365-20-3 7-71. CAB TO CHASSIS GROUND STRAP REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-48). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Socket Set, Socket Wrench (Item 35, Appendix C) Materials/Parts Ties, Cable, Plastic (Item 76, Appendix D) Nut, Self-Locking (Item 148, Appendix G) Lockwasher (Item 70, Appendix G) a. Removal. NOTE Remove plastic cable ties as required. (1) Remove two screws (1) and washers (2) from front grille (3). (2) Remove screw (4) and washer (5) from front grille (3). (3) Remove front grille (3) from cab (6). (4) Loosen screw (7) in chassis (8) and remove cab to chassis ground cable (9). (5) Remove self-locking nut (10), washer (11), cab to chassis ground cable (9), and lockwasher (12) from stud (13). Discard self-locking nut and lockwasher. 7-278 Change 1