TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 520 of 1268
TM 9-2320-365-20-3 7-70. BATTERY TO STARTER CABLE ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-48). Cab raised (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Adhesive (Item 10, Appendix D) Ties, Cable, Plastic (Item 76, Appendix D) Nut, Self-Locking (2) (Item 134, Appendix G) Personnel Required (2) a. Removal. WARNING Remove rings, bracelets, watches, neck- laces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. Batteries can explode from a spark. Battery acid is harmful to skin and eyes. Always wear eye protection when working with batteries. Failure to comply may result in injury to personnel. NOTE • Note routing of battery to starter cable assembly prior to removal. • Tag wires and connection points prior to disconnecting. (1) Remove nut (1), and terminal lugs TL39 (2) and TL10 (3) from battery 24 vdc cable (4). 7-274