TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 489 of 1268
TM 9-2320-365-20-3 7-59. CAB CLEARANCE MARKER LIGHTS CABLE ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-48). PDP cover removed (para 16-2). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Materials/Parts Lockwasher (10) (Item 71, Appendix G) Lockwasher (2) (Item 76, Appendix G) Gasket (5) (Item 23, Appendix G) Lockwire (Item 32, Appendix D) a. Removal. (1) Remove three screws (1) and washers (2) from PDP (3). (2) Remove three screws (4) from PDP (3). (3) Lift PDP (3) outward to gain access. (4) Remove two nuts (5), lockwashers (6), washers (7), and cover (8) from terminal board TB1 (9). Discard lockwashers. (5) Disconnect terminal lug TL74 (10) from terminal board TB1 (9) position 3. (6) Disconnect terminal lug TL86 (11) from terminal board TB2 (12) position 4. Change 1 7-243