TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 479 of 1268
TM 9-2320-365-20-3 7-57. RIGHT-HAND DOOR AND CAB MARKER LIGHTS CABLE ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-48). PDP cover removed (para 16-2). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Materials/Parts Ties, Cable, Plastic (Item 76, Appendix D) Lockwasher (4) (Item 71, Appendix G) Lockwasher (2) (Item 81, Appendix G) Gasket (2) (Item 23, Appendix G) a. Removal. NOTE • Note routing of right-hand door and cab marker lights cable assembly prior to removal. • Remove plastic cable ties as required. (1) Remove three screws (1) and washers (2) from PDP (3). (2) Remove three screws (4) from PDP (3). (3) Lift PDP (3) outward to gain access. (4) Remove two nuts (5), lockwashers (6), washers (7), and cover (8) from terminal board TB1 (9). Discard lockwashers. (5) Disconnect terminal lug TL73 (10) from terminal board TB1 (9) position 1. (6) Disconnect terminal lug TL71 (11) from terminal board TB2 (12) position 2. Change 1 7-233