TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 472 of 1268
TM 9-2320-365-20-3 7-55. M1081 CAB CLEARANCE AND MARKER LIGHTS LOWER CABLE ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-48). PDP cover removed (para 16-2). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-75 lb-in. (Item 86, Appendix B) Material/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Lockwasher (2) (Item 81, Appendix G) a. Removal. (1) Remove three screws (1) and washers (2) from PDP (3). (2) Remove three screws (4) from PDP (3). (3) Lift PDP (3) outward to gain access. NOTE Tag wires and connection points prior to disconnecting. (4) Remove two nuts (5), lockwashers (6), washers (7), and cover (8) from terminal board TB1 (9). Discard lockwashers. (5) Disconnect terminal lug TL74 (10) from terminal board TB1 (9) position 3. (6) Disconnect terminal lug TL86 (11) from terminal board TB2 (12) position 4. 7-226