TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 418 of 1268
TM 9-2320-365-20-3 7-174 Change 2 7-41. OIL PRESSURE TRANSMITTER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Cab raised (TM 9-2320-365-10). Batteries disconnected (para 7-48). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Materials/Parts Antiseize Compound (Item 63, Appendix D) a. Removal. (1) Disconnect connector P32 (1) from oil pressure transmitter (2). (2) Remove oil pressure transmitter (2) from fitting (3). b. Installation. (1) Apply antiseize compound to threads of oil pressure transmitter (2). (2) Install oil pressure transmitter (2) in fitting (3). (3) Connect connector P32 (1) to oil pressure transmitter (2). WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel.