TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 414 of 1268
TM 9-2320-365-20-3 7-39. ETHER SENSOR REPLACEMENT (CONT) (5) Disconnect connector clamp (4) from ether sensor connector (5). (6) Disconnect connector P42 (6) from ether sensor connector (5). (7) Remove ether sensor (7) from coolant bypass tube (8). b. Installation. WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (1) Apply antiseize compound to threads of ether sensor (1). (2) Install ether sensor (1) in coolant bypass tube (2). (3) Connect connector P42 (3) to ether sensor connector (4). (4) Connect connector clamp (5) on ether sensor connector (4). 7-170