TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 398 of 1268
TM 9-2320-365-20-3 7-34. HEADLIGHT AND HOUSING REPLACEMENT/REPAIR/ADJUSTMENT This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Adjustment INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-48). Cab raised (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Headlight Adjustment Screen (Item E-5, Appendix E) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Grommet, Nonmetallic (3) (Item 51, Appendix G) Lockwasher (3) (Item 75, Appendix G) a. Removal. NOTE • Both headlights are removed the same way. Left headlight shown. • Perform steps (1) through (3) to remove lamp. (1) Remove three screws (1) and retaining ring (2) from housing (3). (2) Remove lamp (4) from housing (3). NOTE • Tag connectors and connection points prior to disconnecting. • Connector numbers are the same on left and right headlights. (3) Disconnect connectors 18, 91, and 17 (5) from housing (3). 7-156