TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 395 of 1268
TM 9-2320-365-20-3 7-33. COMPOSITE FRONT LIGHT ASSEMBLY REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-48). Cab raised (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Lockwasher (2) (Item 92, Appendix G) Packing, Preformed (Item 170, Appendix G) a. Removal. NOTE Both composite front light assemblies are removed the same way. Left side shown. Tag wires and connection points prior to disconnecting. Connectors for right side are P8, P9 and P10. (1) Disconnect connectors P22, P23, and P24 (1) from composite front light assembly (2). (2) Remove two screws (3), lockwashers (4), three terminal lugs (5), and composite front light assembly (2) from front bumper (6). Discard lockwashers. 7-153