TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 391 of 1268
TM 9-2320-365-20-3 7-32. COMPOSITE TAILLIGHT ASSEMBLY REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-48). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Wrench Set, Socket (Item 49, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Lockwasher (2) (Item 92, Appendix G) Packing, Preformed (Item 170, Appendix G) Nut, Self-Locking (Item 116, Appendix G) NOTE • Tag wires and connection points prior to disconnecting. • Remove plastic cable ties as required. • Right side connectors are P61, P62, P63, P64, 22-460, 24, 23, 21, and TL 21. a. Removal. NOTE Left and right composite taillights are removed the same way. Left side shown. (1) Remove self-locking nut (1), screw (2), and clamp (3) from taillight carrier (4). Discard self-locking nut. (2) Disconnect connectors P74, P76, P77, P78 (5) from composite taillight connectors 22-461, 24, 23, 21 (6). (3) Remove two screws (7), lockwashers (8), terminal lugs TL18 and TL16 (9), and composite taillight assembly (10) from taillight carrier (4). Discard lockwashers. Change 1 7-149