TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 383 of 1268
TM 9-2320-365-20-3 7-30. BLACKOUT DRIVE LIGHT REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-48). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Materials/Parts Lockwasher (Item 92, Appendix G) Packing, Preformed (Item 168, Appendix G) a. Removal. (1) Disconnect connector P17 (1) from blackout drive light (2). (2) Remove nut (3), lockwasher (4), washer (5), washer (6), and terminal lug TL79 (7) from blackout drive light (2). Discard lockwasher. (3) Remove blackout drive light (2) from bumper (8). b. Disassembly. (1) Loosen three screws (1) on cover (2). (2) Remove cover (2) and preformed packing (3) from housing (4). Discard preformed packing. (3) Remove lamp (5) from socket (6). 7-141