TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 362 of 1268
TM 9-2320-365-20-3 7-22. COOLANT TEMPERATURE LIGHT SWITCH REPLACEMENT (CONT) NOTE Remove plastic cable ties as required. (5) Disconnect connector clamp (4) from coolant temperature light switch (5). (6) Disconnect connector P37 (6) from coolant temperature light switch (5). (7) Remove coolant temperature light switch (5) from thermostat housing (7). b. Installation. WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (1) Apply antiseize compound to threads of coolant temperature light switch (1). (2) Position coolant temperature light switch (1) in thermostat housing (2). (3) Tighten coolant temperature light switch (1) to 20-23 lb-ft (27-31 N·m). (4) Connect connector P37 (3) to coolant temperature light switch (1). NOTE Install plastic cable ties as required. (5) Connect connector clamp (4) on coolant temperature light switch (1). 7-120