TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 345 of 1268
TM 9-2320-365-20-3 (12) Connect vacuum hose (24) to AIR FILTER RESTRICTION GAUGE (25). NOTE • Vehicle serial numbers 0002 through 0017, 0019 through 0025, 0027 through 0031, 0033 through 0038, 0040 and 0041, 0043 through 0053, 0055 through 0089, 0091 through 0254, 0256 through 0258, 0260, 0261, 0263 through 2400, and 2402 through 3091 are not equipped with LAMP TEST switch. • Vehicle serial numbers 0001 through 1477 were originally equipped with dashboard cable assemblies containing two unused connectors for LAMP TEST switch. Vehicle serial numbers 1478 through 3091 were originally equipped with dashboard cable assemblies without connectors for LAMP TEST switch. • All rocker switches are connected the same way. Hazard lights switch shown. Refer to Table 7-2. Rocker Switch Connectors for correct combinations of rocker switches and connectors. (13) Connect connector (26) to hazard lights switch (27). (14) Connect connector (28) to hazard lights switch (27). (15) Perform steps (13) and (14) on remaining rocker switches. NOTE All electrical gages are connected the same way. OIL PRESS gage shown. Refer to Table 7-1.2 Electrical Gages Connectors for correct combinations of gages and connectors. (16) Connect connector (29) to OIL PRESS gage connector (30). (17) Install connector clamp (31) on OIL PRESS gage connector (30). (18) Perform steps (16) and (17) on remaining electrical gages. (19) Connect connector PX7 (32) to lighted indicator display (33). Change 1 7-103