TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 342 of 1268
TM 9-2320-365-20-3 7-15. INSTRUMENT PANEL ASSEMBLY REPLACEMENT/REPAIR (CONT) NOTE All electrical gages are installed the same way. FUEL gage shown. (23) Position FUEL gage (32) in instrument panel (2) with mounting ring (33) and two self-locking nuts (34). (24) Tighten two self-locking nuts (34) to 9 lb-in. (1 N·m). (25) Install two protective caps (35) on FUEL gage (32). (26) Perform steps (23) through (25) on remaining gages. NOTE All rocker switches are installed the same way. Radiator fan off switch shown. (27) Install radiator fan off switch (36) in instrument panel (2). (28) Perform step (27) on remaining rocker switches. d. Installation. (1) Position instrument panel assembly (1) on dashboard (2). NOTE Perform steps (2) through (4) on vehicles equipped with WTEC II transmission controls. (2) Connect connector J114 (3) to WTEC II TEPSS (4). (3) Connect connector J115 (5) to WTEC II TEPSS (4). (4) Install terminal lug (6) on instrument panel assembly (1) with washer (7) and screw (8). 7-100