TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 341 of 1268
TM 9-2320-365-20-3 NOTE Perform steps (16) through (19) on vehicles equipped with WTEC II transmission controls. (16) Position WTEC II TEPSS (23) in instrument panel (2) with three clip nuts (24), mounting bracket (25) and four screws (26). (17) Position two screws (27) and washers (28) in mounting bracket (25). (18) Tighten four screws (26) to 9 lb-in. (1 N·m). (19) Tighten two screws (27) to 27-35 lb-in. (3-4 N·m). NOTE Perform steps (20) through (22) on vehicles equipped with WTEC III transmission controls. (20) Install WTEC III TPSS (29) in instrument panel (2). (21) Position two brackets (30) on rear of WTEC III TPSS (29) with two nuts (31). (22) Tighten two nuts (31) to 11-13 lb-in. (1 N·m). 7-99