TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 336 of 1268
TM 9-2320-365-20-3 7-15. INSTRUMENT PANEL ASSEMBLY REPLACEMENT/REPAIR (CONT) NOTE • All electrical gages are removed the same way. FUEL gage shown. • Note position of electrical gages prior to removal. (4) Remove two protective caps (4), self-locking nuts (5), retaining ring (6), and FUEL gage (7) from instrument panel (3). Discard self-locking nuts. (5) Perform step (4) on remaining electrical gages. NOTE Perform steps (6) and (7) on vehicles equipped with WTEC II transmission controls. (6) Remove two screws (8) and washers (9) from mounting bracket (10). (7) Remove four screws (11), mounting bracket (10), three clip nuts (12), and WTEC II TEPSS (13) from instrument panel (3). NOTE Perform steps (8) and (9) on vehicles equipped with WTEC III transmission controls. (8) Remove two nuts (14) and brackets (15) from WTEC III TPSS (16). (9) Remove WTEC III TPSS (16) from instrument panel (3). 7-94